After a few weeks of waiting, I’ve finally received two breakout boards with BMP085 barometric pressure sensors.
These little chips can run from as low as 1.8V to 3.6V, and measure atmospheric pressure within a 300-1100hPa range, as well as temperature within -40 – 85C range.
They provide a standard I2C interface, so connecting them to Raspberry Pi, Arduino, MSP430 Launchpad etc. is quite easy.
You can get these sensors from Sparkfun, Adafruit (~$20) or (like I did) from Dealextreme (~$8).
Download, copy it to /lib/modules/3.2.27+/kernel/drivers/net/wireless/ and reboot.
After that, setup your wireless network.
UPDATE (2013-01-25): I’ve updated RPi firmware today and it seems that the latest kernel (3.6.11+) includes working driver for TL-WN725N. Instructions below are now obsolete/educational 😉
I’ve decided to replace TL-WN721N adapters with something smaller. After some research and tests with my old Debian laptop, I’ve bought two TP-LINK TL-WN725N 802.11n USB adapters.
In contrast to 721’s, they are smaller and are built on different chipset – Realtek RTL8188CUS.
Installation is not as easy as with Atheros-based adapters, because no kernel driver supports this chipset. Fortunately, Realtek provides open-source Linux drivers on their website.
So, let’s get started 🙂
Continue reading
My Raspberries are expanded with DS3231 I2C realtime clock. It’s a very simple solution, as only required external component is a backup battery (crystal is integrated into the chip!). And it’s also claimed to be very accurate 🙂
By default, Raspbian installation uses “fake hwclock” to read previously stored date/time from file just before clock is synced by NTP client. We’re going to switch to “full” hwclock, first ensuring that our RTC is seen by kernel.
Continue reading
Here’s a short tutorial on how to quickly setup WiFi on your RasPi.
I’m using Atheros based TP-LINK TL-WN721N USB adapter – good and cheap.
Continue reading